::: Al Saad Trading & Contracting :::


Technical Data MSI Pressed Steel Sectional Water Storage Tank plates is manufactured by Mega Sepang Industries SDN BHD in complying strictly to the British Standard BS 1564:1975. The hydraulic press used is so far strongest in the pressed steel tank industry in the country - 700 metric tons. Such powerful press will not only ensure quality of panels produced, but also allow the factory to go into producing stainless steel panels (4mm thick). The powerful Rexroth hydraulic pumps, which is made in Germany and has high reputation in the world market, are used in the whole production line.
Pressed Steel Sectional Rectangular Tanks In Complying to BS 1564 : 1975 This British Standard specifies requirement for pressed steel rectangular tanks, working under a pressure not greater than the static head corresponding to the depth of the tanks, build up of pressed steel plates 1220mm square used to contain cold water, hot water, portable liquids, certain oils and chemicals. Tanks may be constructed with external flanges. With a combined double flange at an angle of 45 Degree and 90 Degree to the plane of the plate on all four sides as illustrated. Tanks are cold pressed as illustrated with the flange corners welded. This standard does not provide for tanks subject to earth or other external pressure otherthan wind pressure. All tanks can be supplied with open or closed top. This standard does not provide for tanks subject to earth or other external pressure other than wind pressure. All tanks can be supplies with open or closed top.